• -15%
  • FREE SHIPPING
Edelbrock | Engine Camshaft Edelbrock Camshafts
Edelbrock | Engine Camshaft Edelbrock Camshafts
Edelbrock | Engine Camshaft Edelbrock Camshafts
Previous keyboard_arrow_left
Next keyboard_arrow_right
zoom_in
Edelbrock | Engine Camshaft Edelbrock Camshafts
Edelbrock | Engine Camshaft Edelbrock Camshafts
Edelbrock | Engine Camshaft Edelbrock Camshafts

Edelbrock

Edelbrock | Engine Camshaft

2206
Edelbrock Rollin' Thunder Camshaft #2206 is designed for 383-400-440 Chrysler V8 engines and produces optimum torque from the low-end to the mid-range.
Free Shipping
CAD $1,024.90 CAD $1,205.76 Save 15%

Quantity

Special Order

  • PROUDLY CANADIAN
  • BEST PRICE GUARANTEE
  • GUARANTEED FITMENT

Edelbrock - Engine Camshaft

 

Description

Edelbrock Rollin' Thunder Camshaft #2206 is designed for 383-400-440 Chrysler V8 engines and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 571HP and 523 Ft Lbs of Torque when paired with Pro-Flo XT EFI system #3544,Performer RPM cylinder heads #60925 and Edelbrock roller tappet lifter set #97483. Must use included bronze distributor gear, failure to do so could result in engine failure. Camshaft utilizes three bolt configuration. Must use with high stall torque converter only., Camshaft specifications:,Intake duration: 240 Degrees,Exhaust duration: 248 Degrees,Intake lift: .540",Exhaust lift: .545",Lobe separation: 112 Degree,Intake Center Line: 107 Degree,Vacuum: 10"

 

Caracteristics

  • Advertised Exhaust Duration: 308
  • Advertised Intake Duration: 300
  • Cam Type: Roller
  • Computer Controlled Compatible: No
  • Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.545
  • Intake Valve Lift with Factory Rocker Arm Ratio: 0.540
  • Lobe Separation: 112
  • Lifter Type: Roller
  • Exhaust Valve Lift: 0.363
  • Intake Valve Lift: 0.360
  • Exhaust Duration at .050 inch Lift: 248
  • Intake Duration at .050 Inch Lift: 240

 

Note:

  • Livraison GRATUITE / FREE Delivery
Not Application Specific
Edelbrock
2206
85347022069
Loading...