AWE Tuning | Touring Edition Axle Back Exhaust (Chrome Silver) - 330i / 330i xDrive / 430i / 430i xDrive 2.0T 2019-2024

AWE Tuning - Exhaust System Kit

Description

Beginning after the secondary catalyst, the Touring Edition picks up right before the rear axle and provides a full single 3” route from this point and splits to dual patented drone-canceling 180 Technology™ resonators, followed by 3” tip outlets. Given the straight-through design and lack of packing material, the 180 Technology® resonators’ job is to defeat drone prone frequencies that would otherwise be experienced within the cabin. Maximum flow is maintained and exterior volume is increased with the interior experience being much more sophisticated and tame. Which option should you go with? Due to the structural differences between the 330i and 430i, we recommend the following configurations: 330i: With all factory emissions equipment in place, the Track Edition is recommended for those wanting an elevated exhaust experience from within the cabin. If you plan to upgrade anything further upstream, consider the Touring Edition. Otherwise, the Touring Edition will resemble stock from within the cabin. 430i: Given the coupe design of the 430i, interior acoustics differ when compared to its sedan sibling, with new frequencies making their way into cabin. Due to this, and with all factory emissions equipment in place, we recommend equipping the Touring Edition to ensure an enjoyable driving experience. Drivers can, of course, equip a Track Edition, but it may be much for some, especially if anything upstream has been changed. You’ve been warned.

Characteristics

• 180 Technology: Yes
• 50 State Legal : Yes
• Country of Orgin : USA
• Edition: Touring Edition
• Fit Guarantee : Yes
• Hardware Included: Yes
• Material: T304 Stainless Steel
• Muffler Quantity: 2
• No CEL Guarantee : Yes
• System Type: Axle Back
• Tip Diameter: 114
• Tip Finish: Chrome Silver
• Tip Qty: 2
• Tubing Diameter: 3
• Tune Required: No
• Valves: No

Attributs

• 50-state emissions legal
• Features AWE’s patented drone-canceling 180 Technology®
• Engineered for coupe and sedan
• Included OEM sleeve clamp allows easy conversion back to stock exhaust if needed
• Crafted from CNC mandrel-bent 3” U.S.-sourced .065” wall T304L stainless steel
• AWE Valve Simulator Brackets included
• Dual 4.5” slash-cut tips in chrome silver
• Direct bolt-on for factory-like simplicity
• Less is more: clean, straight-through design maximizes performance
• Perfect fitment, guaranteed
• Features the AWE No CEL Guarantee
• Lifetime warranty

Note:

• Livraison GRATUITE / FREE Delivery