Mishimoto | Intercooler Kit, Black/Red, fits Toyota Tacoma 2024+ - Land Cruiser / Tacoma 2.4T 2024-2026

Mishimoto - Intercooler Kit

Description

The 2024+ Tacoma's T24A-FTS builds heat soak under repeated load - the factory tube-and-fin intercooler loses cooling capacity across consecutive WOT runs, towing grades, and sustained trail use. The Mishimoto Intercooler and Charge Pipe Kit addresses the full charge air system in one purchase: a 55% larger bar-and-plate core paired with aluminum charge piping, DuraCore™ couplers, and constant-tension clamps, matched from intercooler to throttle body.--The bar-and-plate core cuts intake air temps by up to 36°F at wide-open throttle and delivers 30% lower pressure drop than stock, reducing turbocharger strain and maintaining boost efficiency under load. An included custom shroud directs full airflow to every row of the oversized core - no trimming required. Cast end tanks, billet aluminum ORB ports, updated mounting bushings, and an included crush washer complete the hardware package for a sealed, long-term install.--The system preserves Toyota's adaptive cruise control with no sensor relocation. Fits the 2024+ Toyota Tacoma (T24A-FTS, N400) and 2024+ Toyota Land Cruiser LC250. Available in Silver or Stealth Black intercooler finish with matching Wrinkle Black or Wrinkle Red charge pipes. Compatible with OEM and Mishimoto components for future cooling system expansion. Backed by the Mishimoto Lifetime Warranty.

Characteristics

• 11248: Aluminum
• 11249: Powder Coated
• 11252: 2.03 IN
• 11253: 2.22 IN
• 11254: Air-to-Air
• 11256: Bar-and-Plate
• 11257: Cast
• 267: 8.87 IN
• 268: 3.5 IN
• 302: Aluminum
• 3145: Specific
• 3390: Performance
• 3530: Aluminum
• 3531: Black
• 397: 24.13 IN
• 570: 2.03 IN
• 5745: Black
• 5746: Silicone
• 6347: Yes
• 638: 2.22 IN
• 6591: 50
• 7556: Black
• 8308: 650
• Install Difficulty: 4
• OptionLabel: Black Intercooler, Black Pipes
• TechSpec Applications: Toyota Tacoma 2.4L L4 2024+--Toyota Land Cruiser 2.4L L4 2024+
• TechSpec Chassis Codes: N400
• TechSpec Core Height (in): 8.87
• TechSpec Core Length (in): 24.13
• TechSpec Core Thickness (in): 3.5
• TechSpec Core Type: Bar-And-Plate
• TechSpec Engine Codes: T24A-FTS
• TechSpec Includes: (1) Performance Intercooler--(2) Vacuum Fittings--(1) Intercooler Duct--(1) Intercooler Duct Bracket--(2) Hot-Side Intercooler Pipes--(2) Cold-Side Intercooler Pipes--(2) Silicone Couplers--(1) Bill Of Materials Notecard--Mishimoto Lifetime Warranty
• TechSpec Inlet (in): 2.03
• TechSpec Maximum Recommended Boost Pressure (PSI): 50
• TechSpec Maximum Recommended Horsepower: 650
• TechSpec Note: 2024+ Toyota Land Cruiser (LC250) installation may require removal of a bracket on the top of the AC condenser.
• TechSpec Outlet (in): 2.22
• TechSpec Pipe Diameter: 2.5" (Hot-Side) 3" (Cold-Side)

Attributs

• Cuts charge air temps by up to 36°F at wide-open throttle — a 55% larger bar-and-plate core provides the heat-sink capacity the factory tube-and-fin unit loses under repeated WOT pulls, towing grades, and sustained off-road operation.
• Included custom shroud ensures full airflow reaches every row of the oversized core — no trimming, no gaps, and no performance loss from an undirected core face that would otherwise undercut the 55% volume increase.
• Reduces turbocharger stress with 30% lower pressure drop than OEM — optimized airflow through the 3.50-in thick core maintains boost pressure and consistent power across the RPM range under sustained demand.

Note:

• Livraison GRATUITE / FREE Delivery