CorkSport | Rear Strut Brace (Triangulated Brace) - Mazda 3 Hatchback 2019-2025

CorkSport - Mazda 3 Rear Strut Brace - Hatchback

Fitment Driven:

The CorkSport Rear Hatch Brace gets installed just behind the rear seats so full functionality is retained and the cross bars are tucked out of the way so there is plenty of cargo space left available. The brackets that tie into the chassis utilize factory mounting locations so no new holes are needed during installation. The only pieces that will have to be modified include the side trim and the lower foam insert and floor cover if you decided to go with the Stage 2 configuration. More details can be found below in the install instructions if you want to see exactly what parts need to be modified.

Design Focused:

The main design focus of the CS Rear Hatch Brace was for the cross bars to be fully removable, whether you are opting for the Stage 1 or 2 variant. This was a main factor as we wanted the cargo area in the hatch to still be practical and usable for day-to-day activities. Each crossbar can be taken out with the removal of 4 bolts, so when you need to carry some larger cargo, they can be detached without you having to dig back into the interior.

Stage 2 Configuration:

The Stage 2 on the other hand integrates two additional bars that tie the side brackets and a center lower seat bracket and help triangulate the brace to provide more rigidity and performance.

Cross Bars:

The cross bars that tie the brackets together are made from 0.083” wall carbon steel rectangular tubing and provide all the strength necessary to help reduce excess flex in the hatch chassis. They are also powder coated in the same textured black to match the brackets and give off an OE like appearance.

Hardware and Accessories:

The CS Rear Hatch Brace features stainless steel hardware that ties all the bars together. We also include countersunk bolts and washers to provide a nice finishing touch that complements the overall appearance of the brace.

Note:

• Livraison GRATUITE / FREE Delivery