Killer B | 4-1 Holy Header 2-Bolt Manifold - Subaru 2002-2019

Killer B Motorsport - 4-1 Holy Header 2-Bolt Manifold

 Le Killer B Motorsport Holy Header a été développé à l'aide d'un logiciel de CAO et de simulations de pointe pour déterminer la conception optimale afin d'augmenter la puissance autant que possible sur toute la plage de régime. Des primaires aussi courts que possible avec un seul secondaire réduisent considérablement le volume du collecteur permettant à la pression des gaz d'échappement de s'accumuler rapidement. La conception symétrique 4-1 maintient une vitesse d'échappement élevée et constante à mesure que les RPM augmentent. Vous pouvez vous attendre à un temps de spool plus rapide par rapport aux conceptions primaires/doubles secondaires longues. Une différence que vous remarquerez immédiatement dans la réponse de l'accélérateur/boost et la capacité de maintenir plus de puissance plus haut dans les régimes.

Details

• Cast Collector. The collector is thick walled cast 347 (321) stainless. The casting removes several welds, each weld removed is one less flow disruption (reduced turbulence). The casting has features milled into it that assure the primary tubes fit VERY concentric every time. Using a casting allows the collector to be designed as a true high velocity merge vs tubing that can only be formed a little bit, and not ideally. The casting is thicker/stronger than formed tube and holds heat better.
• Short Equal Length Primaries. The shortest possible length primaries you can have on an Equal Length header. Short means less header volume and quick spool up.
• Symmetrical Primary Design. All primaries have a similar tube length AND bend geometry. This keeps the pulse velocities high and consistent compared to equal length headers with different (non-symmetrical) primary tubing geometry.
• Smooth Mandrel Bends. All of the bends utilize a mandrel for smooth non-restrictive flow. Not only that, we use the largest bends possible at every location. It would be cheaper to use 2” bends everywhere, like others do, but that’s not going to give the best performance.
• Thick Walled 321 Stainless Steel Construction for Long Life. 321 is alloyed with titanium, costs more, a lot more, but it’s the ideal material for high temperature turbocharged applications. Would 304 stainless work, yes, but the temperatures on our turbocharged cars can exceed the limits of 304 stainless enough to make them brittle and crack. 321 stainless steel has higher strength and toughness at elevated temperatures. It was developed by the aircraft industry specifically to address 304 stainless manifolds that were cracking. Killer B Motorsport is the only company that manufactures full 321 headers.
• High Heat Retention. 321 stainless steel conducts less heat than 304 stainless steel. The short primaries and properly sized secondaries also pull less heat from the exhaust gasses increasing turbine efficiency. Large tubing headers expose the exhaust gasses to more surface area transmitting more heat and reducing exhaust energy. You can also ceramic coat (and keep the warranty) without exceeding the temperature range like you can with 304 stainless.
• Made in the USA and Killer B quality! Every Header setup is inspected, assembled and pressure tested before it ships to assure a leak free setup!

Noter:

• Livraison GRATUITE / FREE Delivery