JLT Performance | Series 3 Cold Air Intake - Mustang 2005-2009

JLT Performance - Series 3 Cold Air Intake

JLT Series 3 Cold Air Intake

Though our JLT Series 2 was a huge success and on more cars than we ever imagined, we did a complete redesign in January 2012 from top to bottom and now have the JLT Series 3 CAI.

SERIES 3 TUBE DESIGN
The JLT Series 3 tube is 4 1/4" ID, roto molded plastic to resist engine heat and keep the intake air charge nice and cool. NO METAL TUBING HERE!!
With no separate MAF housing or couplers air flow is fast and smooth. The tube has a 110mm MAF housing molded right in the tube. The largest on the market.

JLT Series 3 Cold Air Intake

Though our JLT Series 2 was a huge success and on more cars than we ever imagined, we did a complete redesign in January 2012 from top to bottom and now have the JLT Series 3 CAI.

SERIES 3 TUBE DESIGN
The JLT Series 3 tube is 4 1/4" ID, roto molded plastic to resist engine heat and keep the intake air charge nice and cool. NO METAL TUBING HERE!!
With no separate MAF housing or couplers air flow is fast and smooth. The tube has a 110mm MAF housing molded right in the tube. The largest on the market.

FINISH
Standard finish is an OEM looking black textured plastic.

INTAKE INSTALL
The detailed instructions and online video instructions helps make this an easy install (see Instructions & Videos tabs to download / view).

INTAKE FITMENT
2005-2009 Mustang GT
2007-2008 Shelby GT
2008 Bullitt
2005-2009 Non Supercharged Roush Mustangs All 2005-2009 GT's with Saleen Supercharges

GT500 Throttle Body Info: Due to the size of the GT500 throttle body and spacers required to make it work on a 4.6, it will not fit with our intake kit. The GT500 throttle body requires a 5” coupler and our tube is 4.5”. A 5-4.5” reducing coupler “may” work, but it is your responsibility to find any parts needed and fitment is not guaranteed. Please do not call us for any needed parts to make this part work with our intake kit.

INTAKE KIT INCLUDES:
JLT Plastic Intake Tube
Silicone Coupler
4.5x9 S&B Powerstack Air Filter
ABS Heat Shield
PCV hose
HD Clamps & all needed hardware

AIR FILTER OPTIONS - OIL OR DRY
We use only the best air filters made by S&B to our specifications.
For years we only used oiled filters, but dry filter technology has been proven and is now a popular option.

Should I choose a Dry Disposable or Cotton Oiled Filter?
Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.

Dry: Comparable airflow to oiled cotton filters with the same great protection.
Last for up to 30,000 miles of highway driving. Extend the life of the filter using compressed air.

Oil: Oiled filters can last forever as long as you properly clean and re-oil it.
See picture of filters below. Oil filters are available in red or blue and Dry filters are white.

MAINTENANCE
To properly clean your filter, we recommend the S&B Precision II Cleaning & Oiling Kit.
*TIP* by purchasing a 2nd air filter you can simply swap filters when it's time to clean it and not be rushed. Clean the first filter and it's ready when it's time to change again.

JLT Pre-Filters are now available for most intake kits we carry, these filters are made for us by Outerwears, these prefilters are water repellent. They will increase your filter life and cut down on your cleaning intervals! For more information check the product page here JLT Air Filter PRE FILTER

Standard finish is an OEM looking black textured plastic.

INTAKE INSTALL
The detailed instructions and online video instructions helps make this an easy install (see Instructions & Videos tabs to download / view).

INTAKE FITMENT
2005-2009 Mustang GT
2007-2008 Shelby GT
2008 Bullitt
2005-2009 Non Supercharged Roush Mustangs All 2005-2009 GT's with Saleen Supercharges

GT500 Throttle Body Info: Due to the size of the GT500 throttle body and spacers required to make it work on a 4.6, it will not fit with our intake kit. The GT500 throttle body requires a 5” coupler and our tube is 4.5”. A 5-4.5” reducing coupler “may” work, but it is your responsibility to find any parts needed and fitment is not guaranteed. Please do not call us for any needed parts to make this part work with our intake kit.

INTAKE KIT INCLUDES:
JLT Plastic Intake Tube
Silicone Coupler
4.5x9 S&B Powerstack Air Filter
ABS Heat Shield
PCV hose
HD Clamps & all needed hardware

AIR FILTER OPTIONS - OIL OR DRY
We use only the best air filters made by S&B to our specifications.
For years we only used oiled filters, but dry filter technology has been proven and is now a popular option.

Should I choose a Dry Disposable or Cotton Oiled Filter?
Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.

Dry: Comparable airflow to oiled cotton filters with the same great protection.
Last for up to 30,000 miles of highway driving. Extend the life of the filter using compressed air.

Oil: Oiled filters can last forever as long as you properly clean and re-oil it.
See picture of filters below. Oil filters are available in red or blue and Dry filters are white.

MAINTENANCE
To properly clean your filter, we recommend the S&B Precision II Cleaning & Oiling Kit.
*TIP* by purchasing a 2nd air filter you can simply swap filters when it's time to clean it and not be rushed. Clean the first filter and it's ready when it's time to change again.

JLT Pre-Filters are now available for most intake kits we carry, these filters are made for us by Outerwears, these prefilters are water repellent. They will increase your filter life and cut down on your cleaning intervals! For more information check the product page here JLT Air Filter PRE FILTER

Note:

• Livraison GRATUITE / FREE Delivery