Edelbrock | Engine Camshaft

Edelbrock - Engine Camshaft

 

Description

Edelbrock Rollin' Thunder Camshaft #2231 is designed for 283-400 Chevy V8 engines and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 460HP and 460 Ft Lbs of Torque when paired with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS Carb #1813 and Performer RPM E-Tec cylinder heads #60985 on a 383 c.i.d. Small block Chevy engine. Must be used with a thrust button, high stall torque converter, and stock ratio rocker arms only., Camshaft specifications:,Intake duration: 242 Degrees,Exhaust duration: 240 Degrees,Intake lift: .594",Exhaust lift: .594",Lobe separation: 112 Degree,Intake Center Line: 107 Degree,Vacuum: 11"

 

Caracteristics

• Cam Type: Roller
• Computer Controlled Compatible: No
• Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.594
• Intake Valve Lift with Factory Rocker Arm Ratio: 0.594
• Lobe Separation: 112
• Lifter Type: Roller
• Exhaust Duration at .050 inch Lift: 240
• Intake Duration at .050 Inch Lift: 242

 

Note:

• Livraison GRATUITE / FREE Delivery