Edelbrock | Engine Camshaft and Lifter Kit - Mustang 1970-1971

Edelbrock - Engine Camshaft and Lifter Kit

Description

Edelbrock part #2172 Performer-Plus camshaft is designed for Ford 351M-400 V-8 applications. This Edelbrock cam kit produced 390 ft-lbs. of torque when used with #2171 intake and stock iron cylinder heads on a 400 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees - Lift @ Valve Intake: .484" - Lift @ Valve Exhaust: .510" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 14"

Characteristics

• RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
• Advertised Intake Duration: 282
• Advertised Exhaust Duration: 292
• Lobe Separation: 112
• Intake Valve Lift: 0.484 IN
• Grade Type: Performance
• Lifter Materials: Hardened Steel
• Computer Controlled Compatible: No
• Lifter Type: Hydraulic
• Exhaust Duration at .050 inch Lift: 214
• Intake Duration .050 Inch Lift: 204
• Cam Type: Cast
• Exhaust Valve Lift: 0.510 IN

Note:

• Livraison GRATUITE / FREE Delivery