Edelbrock | Engine Camshaft and Lifter Kit

Edelbrock - Engine Camshaft and Lifter Kit

Description

Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees - Lift @ Valve Intake: .520" - Lift @ Valve Exhaust: .544" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 11"

Characteristics

• Exhaust Valve Lift: 0.544 IN
• Exhaust Duration at .050 inch Lift: 244
• Intake Duration .050 Inch Lift: 234
• Cam Type: Cast
• Intake Valve Lift: 0.520 IN
• Lobe Separation: 112
• Lifter Type: Hydraulic
• RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
• Computer Controlled Compatible: No
• Grade Type: Performance
• Lifter Materials: Hardened Steel

Note:

• Livraison GRATUITE / FREE Delivery