Anderson Composites | HOOD - Camaro 3.6L / 6.2L / 7.0L 2010-2015

Fiberglass Hood

Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold, sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. No additional clear coat is required.

Anderson Composites strongly recommends having your body parts installed by a professional bodyshop, modifications or adjustments may be required for proper installation on your CHEVROLET!

NOTE: Fiberglass "skeleton" bonded to underside of fiberglass hood for strength and support (matte black enamel finish). Replaces OE hood. Mounts with OE hardware. Requires hood pins for safety reasons. Do not install gas hood shocks, dampers, or struts. Requires the use of a heat shield.

Note:

• Livraison GRATUITE / FREE Delivery