Edelbrock | Engine Camshaft and Lifter Kit

Edelbrock - Engine Camshaft and Lifter Kit

Description

Edelbrock Performer-Plus Camshaft #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2132 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 275 Ft Lbs of Torque when paired with Performer AMC intake manifold #2131 and stock cylinder heads. Camshaft specifications: - Intake duration: 204 Degrees - Exhaust duration: 214 Degrees - Intake lift: .448" - Exhaust lift: .472" - Lobe separation: 110 Degree - Intake Center Line: 105 Degree - Vacuum: 15"

Caractéristiques

• Lobe Separation: 110
• Exhaust Valve Lift: 0.472 IN
• Grade Type: Performance
• Lifter Materials: Hardened Steel
• Advertised Intake Duration: 278
• Cam Type: Cast
• Lifter Type: Hydraulic
• Intake Valve Lift: 0.448 IN
• Exhaust Duration at .050 inch Lift: 214
• RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
• Advertised Exhaust Duration: 288
• Computer Controlled Compatible: No
• Intake Duration .050 Inch Lift: 204

Noter:

• Livraison GRATUITE / FREE Delivery