Edelbrock | Engine Camshaft - Camaro / Corvette / Monte Carlo / Firebird 5.0L / 5.7L 1987-1992

Edelbrock - Engine Camshaft

Description

Edelbrock Rollin' Thunder Camshaft #2204 is designed for 283-400 Chevy V8 engines from 1987-Later (Non LT1/Gen III) and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 435HP and 435 Ft Lbs of Torque when paired with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS Carb #1813 and Performer RPM E-Tec cylinder heads #60795. Use with high stall torque converter and stock ratio rocker arms only. Camshaft specifications: - Intake duration: 234 Degrees - Exhaust duration: 238 Degrees - Intake lift: .539" - Exhaust lift: .548" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 12"

Caractéristiques

• Lobe Separation: 112
• Computer Controlled Compatible: No
• Intake Valve Lift with Factory Rocker Arm Ratio: 0.539 IN
• Exhaust Duration at .050 inch Lift: 238
• Intake Duration at .050 Inch Lift: 234
• Exhaust Valve Lift: 0.365 IN
• Advertised Exhaust Duration: 300
• Cam Type: Roller
• Lifter Type: Roller
• Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.548 IN
• Intake Valve Lift: 0.539 IN
• RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
• Advertised Intake Duration: 296

Noter:

• Livraison GRATUITE / FREE Delivery