Edelbrock | Engine Camshaft and Lifter Kit - Camaro / Corvette / Firebird 5.0L / 5.7L 1982-1992

Edelbrock - Engine Camshaft and Lifter Kit

Description

Edelbrock part #3702 Performer-Plus camshaft is designed for small-block Chevy 305-350 T.B.I & LG-4 V-8 applications. This Edelbrock cam kit produced 245 ft-lbs. of torque when used with #3701 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 194 degrees - Duration @ .050 Exhaust: 214 degrees - Lift @ Valve Intake: .398" - Lift @ Valve Exhaust: .442" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 16"

Caractéristiques

• Advertised Intake Duration: 244
• Lobe Separation: 112
• Cam Type: Cast
• Lifter Type: Hydraulic
• Exhaust Valve Lift: 0.442 IN
• Exhaust Duration at .050 inch Lift: 214
• CARB Executive Order Number: D-215-19
• Grade Type: Performance
• Lifter Materials: Hardened Steel
• Computer Controlled Compatible: Yes
• Advertised Exhaust Duration: 264
• Intake Valve Lift: 0.398 IN
• Intake Duration .050 Inch Lift: 194
• RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Noter:

• Livraison GRATUITE / FREE Delivery