Dinan | Heat Exchanger - M2 Competition / M3 / M4 / M4 GTS 3.0T 2016-2020

DINAN - Heat Exchanger

 

Description

In stock trim, testing made it painfully obviously that cooling was going to hold an even more vital role on the platform to achieve maximum results. The stock cooling system heat soaks after only 3 pulls and allows the engine air intake temperatures to rise dangerously. The Electronic control unit must then reduce engine power to prevent detonation. With the Dinan high performance heat exchanger the vehicle does not heat soak even after 7 pulls; more than twice the effectiveness of a stock setup! Some may ask why change the heat exchanger and not the intercooler itself? Wouldnt it be more beneficial to go directly to the source of the charge air? The simple answer is yes, but at a cost. The stock system cools the intake charge by using a water-to-air intercooler, an expensive piece to engineer. The cooling circuit for the water that feeds the intercooler uses a primary c

 

Caractéristiques

• Core Height: 9.000
• Overall Length: 29.000 in.

 

Attributs

• 60 Percent More Core Volume and 19 Percent More Face Area
• 40 mm. Thick Cooler Versus 24 mm. Thick Stock Cooler
• 9 Degrees Average Water Temperature Reduction
• Colder Water Improves Intercooler Efficiency
• Cold Water Allows The Intake Air To Be Cooled By Extra 6 Degrees
• Significant Reduction In Tendency To Heat Soak
• Rubber Mounted For Vibration Isolation
• Track Tested To Ensure Consistent Performance In Tough Conditions
• The Cooling Unlocks Some Significant Additional Power
• Includes Mounting Brackets / Bushings And Hardware

 

Noter:

• Livraison GRATUITE / FREE Delivery