Dexter | ELECT.OVER HYDRAU.ACTUATORS

Electric-hydraulic brake actuator works with your brake controller (sold separately) to activate your trailer's drum brakes. Vented housing releases heat and moisture. Enhanced wiring protection safeguards internal electronics.


Features:

• Electric-over-hydraulic brake actuator activates your trailer's hydraulic brakes when you apply the brakes in your vehicle
• Brake controller (sold separately) is required to send signal from tow vehicle to actuator when brakes are applied
• 7-Way trailer connector (sold separately) is needed to transmit signal from brake controller
• Improved functionality when compared with surge brake couplers
• Faster response time - activates when you apply brakes in tow vehicle, as opposed to when trailer pushes against hitch ball
• No need to manually lock out brakes when you back up
• Trailer brakes can be intentionally activated when you reverse
• Manual override on brake controller can be activated so you can engage the trailer brakes without having to apply your vehicle brakes
• Vented design releases pressure, moisture, and heat to protect the internal components
• Allows actuator to be mounted in places where most actuators would overheat
• Electronic, proportional pressure valve ensures smooth, even braking
• Self-priming pump reduces time needed for brake bleeding
• Enhanced wiring detects dangerous current levels and shuts down actuator electronics in the event of a surge
• Durable aluminum housing and stainless steel fasteners resist corrosion
• Goretite seals protect the circuit board from the elements
• Compatible with most 9-amp-hour-battery breakaway kits (sold separately)
• DOT compliant
• Unit installs on trailer frame and connects to trailer's wiring and hydraulic brake lines (sold separately)
• Made in the USA

• Application: single-, tandem-, and triple-axle trailers with drum brakes
• Maximum output pressure: 1,000 psi
• Dimensions: 11" long x 6" wide x 7" tall
• Distance between mounting holes (center to center):
  • 2-1/2" between holes on same side of bracket
  • 9-13/16" between holes on opposite sides of bracket
• Mounting hole diameter: 1/4"
• Hydraulic port size: 3/16"
• Power: 12V DC
• Wire configuration:
  • Black: 12-volt power
  • Blue: brake controller
  • Yellow: breakaway
  • White: ground
• 2-Year limited warranty

Note:

• Livraison GRATUITE / FREE Delivery